Faith HiGloss 3 Baritone Neptune Cut/Electro - 3-Piece Rosewood

FNBCEHG3


Faith HiGloss 3 Baritone Neptune Cut/Electro - 3-Piece Rosewood
Faith HiGloss 3 Baritone Neptune Cut/Electro - 3-Piece Rosewood Faith HiGloss 3 Baritone Neptune Cut/Electro - 3-Piece Rosewood Faith HiGloss 3 Baritone Neptune Cut/Electro - 3-Piece Rosewood Faith HiGloss 3 Baritone Neptune Cut/Electro - 3-Piece Rosewood Faith HiGloss 3 Baritone Neptune Cut/Electro - 3-Piece Rosewood Faith HiGloss 3 Baritone Neptune Cut/Electro - 3-Piece Rosewood Faith HiGloss 3 Baritone Neptune Cut/Electro - 3-Piece Rosewood

Overview

The Faith Neptune Baritone HiGloss is the very first Baritone model we have produced. Featuring one of our favourite shapes – the baby-jumbo Neptune – the new Baritone features a longer neck and scale length (700mm) and is fitted with longer, higher gauge strings allowing it to be tuned to a lower register.

Here’s for the slightly technical bit…

A longer scale length means lower registers can be achieved without strings turning all floppy and sounding pretty horrible. The longer neck allows the use of heavier gauge strings which in turn means you can tune each string much lower than usual, yet maintain the correct, playable string tension.

So, you can still tune your Baritone in standard tuning and play the same chord shapes you’re used to, yet achieve a much lower sound. Common standard Baritone tunings include A D G C E A (a 5th lower) or a B E A D F♯ B (a 4th lower).

Where are Baritone guitars used?

A staple of a wide range of musical styles from jazz, hard rock, surf, and even fingerstyle acoustic music. The darker, slightly more ominous tone works perfectly for certain types of music and is nigh-on impossible to achieve on a standard acoustic guitar that typically operates in the higher tuning registers that therefore deliver a brighter sound.

A good Baritone should sound low enough in the mix to stand out from a standard acoustic yet still sit high enough to cut through above the bass. Our HiGloss Baritone features an all-over high-gloss finish that is particularly effective in aiding the natural resonance of the Neptune body shape while ensuring a fantastic level of clarity, string articulation and volume is achieved.

Faith HiGloss series have always been designed to offer both visual and aural beauty, and with the updating to HiGloss-3, we’re sure you’ll agree these wonderful instruments will continue to inspire musicians for generations to come.

Using a more sustainable 3-piece, solid rosewood back design, we can ensure that these incredibly popular models are available longer-term and yet retain all the tonal and visual punch that HiGloss-series afficianados have come to expect. Using high grade Englemann Spruce for the top and highly-figured, 3-piece Rosewood bound in Flamed Maple for the back and sides, HiGloss-3 models also feature solid Flamed Maple binding on the front and use stripy Indonesian Ebony for the fingerboard, bridge, headplate and heelcap.

Tonally, this combination of wood is generally bright and ‘zingy’, delivering great clarity. Visualising this as a frequency curve, it would be shaped like a smile: high on the bass, dipping down through the middle and rising once again at the top end. Therefore greater string separation and articulation is achieved, lending itself to fingerstyle and solo pieces in particular.

All HiGloss series Faith Guitars are complete with a Faith Hardcase.

Visit www.faithguitars.com for more info

This Faith Guitar is fitted with the refined, low-profile Fishman INK3 preamp system with the Sonicore piezo pickup located under the saddle. The preamp features a chromatic tuner, 3 band EQ and volume control. The output jack is located at the base of the guitar as part of the ingenious, easy-access battery compartment. https://www.faithguitars.com/electronics

Electronics

Fishman Pre-Amp / Pickup

This Faith Guitar is fitted with the refined, low-profile Fishman INK3 preamp system with the Sonicore piezo pickup located under the saddle. The preamp features a chromatic tuner, 3 band EQ and volume control. The output jack is located at the base of the guitar as part of the ingenious, easy-access battery compartment.


Just One Tree

Planting trees for every Faith Guitar sold

Faith Guitars are delighted to partner with JUST ONE Tree, pledging to plant trees every time a new Faith guitar is sold, anywhere around the world.

JUST ONE Tree is a not-for-profit organisation based in the UK who plant trees in areas severely affected by deforestation to maximise the effect on reducing global warming. In the process they help to provide agricultural education and sustainable incomes to local communities.

FIND OUT MORE


Specification

Commodity Code 9202903000
Manufacturer Faith Guitars
Country of Origin Indonesia
Barcode 5036678119732
Master Carton 2
Back / Side Wood Solid 3-Piece Rosewood
Finish Type Gloss
Guitar Style Acoustic-Electro
Right / Left Handed Righthanded
Top Wood Solid Engelmann Spruce

Packaged Weight & Dimensions

Height (CM) 113
Width (CM) 56
Depth (CM) 18.5
Weight (Kg) 0

Get social with Faith Guitars